Size Guide
How to Measure and Find Your Ring Size
To choose the correct size for you measure your body as follows:
1. Cut a strip of paper or a piece of string. Wrap the paper or string around the finger to be sized.
2. Use a pen to mark the string on paper where the long end overlaps. Measure the mark from the end of the length of the paper on a string with a ruler.
3. Locate your ring size by locating your measurement on the printed chart. If the measurement falls in between two sizes, it is recommended that you choose the larger size.

4. Please carefully choose the right size according to the detailed size chart in the description to possibly avoid the trouble of return and exchange.
US / CANADA | UK / AUSTRALIA | DIAMETER | CIRCUMFERENCE |
5 | J-½ | 15.8 mm | 49.6 mm |
6 | L-½ | 16.5 mm | 51.8 mm |
7 | N-½ | 17.2 mm | 54.4 mm |
8 | P-½ | 18.2 mm | 57.2 mm |
9 | R-½ | 19.1 mm | 60 mm |
10 | T-½ | 19.8 mm | 62.2 mm |
11 | V-½ | 20.6 mm | 64.8 mm |
12 | X-½ | 21.6 mm | 67.9 mm |
13 | Z+1 | 22.3 mm | 70.1 mm |
14 | Z+3 | 23.0 mm | 72.3 mm |
15 | Z+5 | 23.8 mm | 74.8 mm |

NECKLACES VARY BY LENGTH AND CAN BE CHOSEN TO REFLECT PERSONAL PREFERENCE OR STYLE.
* For Chokers, Add Two Inches To Whatever Your Neck Measurement Is For A Comfortable Fit.
* Adding Four Inches To Your Neck Measurement Will Give You A Good Length For An Average Necklace, Like A Pendant.
To choose the right size of your bracelet just measure your wrist and choose the size of the bracelet below:
WRIST MEASUREMENTS SIZE | SIZE DESCRIPTION |
6 inch | Ladies Small |
6.5 inch | Ladies Medium |
7 inch | Ladies Large and Men's Small |
7.5 inch | Men's Medium |
8 inch | Men's Large |
8.5 inch | Men's Extra Large |
9 inch | Men's 2X Large |
Bring your thumb and little fingers together.
Measure the circumference of your hand at the widest point using tape or thread.
Then measure that with a ruler. You will get the circumference of your bangle and compare it with the measurement chart.
